• Model Number:
• Place of Origin: Guangdong, China
• Minimum Order Quantity: 0 Pieces
• Supply Capacity: 0 Pieces/month
• MemberShip: Free Member
• Inquiry Now
• Bookmark & Share:

Description

1.Introduction:

AP-587 is a kind of silicone gel which is very soft, transparent and can protect senstive micro-electronics components well, such as solar cells, sensor and electronic components of automobile, heavy-duty rectifier module and optoelectronic devices. It is no swelling and no corrosion, bonding Ics, and ensures the electronic components works normally in the large temperature change range and strong vibration condition.

Possesses self-adhesive performance, easy to repair.

After curing, the gel produced a layer of elastic organosilicon film which is durable and protect the electronic component from the impact and corrosion of environment effectively.

Can use automatic mixed measuring equipment for coating, it is suitable for mass production.

Applied for room curing and heat curing.

Wide range of temperature range -45~150¡æ.



2. Technical parameters:






No.



Items



Technical parameters





1



Before curing (A/ B components)



Exterior



Colourless, transparent, liquid





2



Viscosity mPa.s



1500





3



Specific gravity g/mL



0.97





4







Mix ratio



1:1(by weight or by volume)





5



After curing



Apearance



Colourless, transparent, silicone gel





6



Specific gravity g/mL



0.97





7



Volume resistivity Ω.cm



1015





8



Curing time



Room temperature



24hours





9



100¡æ



30mins





10



150¡æ



10mins








3.Usage:

1. Measure: accurate weighing A, B component;

2. Mixes the silicon gel: Join B component to A component and then uniform mixing;

3. Deaeration: to put the sizing material in the vacuum cabinet the deaeration;

4. Pouring: fills the sizing material seals in the spare part; (Before filling seals, in order to avoid influence solidification, pls keep the components surface and mixer clean and dry, cannot contact chemical compound such as N, P, S, Sn, Pb, Hg and so on.)

5. Solidification: Curing the components by room temperature or heating.



4. Announcements:

Certain material, chemical agent, curing agent and the plasticizer may suppress gel’s solidification; Should pay attention materials: the organic tin and containing organic tin; the sulfur, polysulfide or containing sulfur ; The amine, polyurethane rubber or containing ammonia; the phosphorus or containing phosphorus; acidic (organic acid) and some flux residues; If suspicion includes the above material before the use, we suggested makes the sample test confirmation after first, then volume production. If there are uncured material between the base material and the cured gel surface, it means they are incompatible and will restrain curing.



5.Package:

16kg/set(A component 8kg+B component 8kg)

6. Storage and transportation:

a) dry place for one year please (under 25¡æ).

b)Can be shipped as regular chemical products for its harmlessness.

c) A and B components should be sealed well lest being out during transportation.