LED Tube Lights
- Model Number: CX-exledst-007
- Place of Origin: Guangdong, China
- Minimum Order Quantity: 0 Pieces
- Supply Capacity: 0 Pieces/month
- MemberShip: Free Member
- Inquiry Now
led tube lights Description
Product Name: led tube lights
Description
Specifications:
Voltage: 110/240V AC
PF: 0.90
Power: 9W
IP: IP40
LED quantity: 168 pieces x φ3LED
Luminous flux: 600 to 700lm
Wavelength: 2,700 to 7,000K
Working frequency: 50/60Hz
Working temperature: -20 to +50?C
Length:60CM
Lifespan: 50,000 hours
Material: aluminum alloy + PC
Beam angle: 120 to 135 degrees
Light decay: 3% after 3,000 hours
Equal to 45W traditional fluorescent lamp
Remarks: any colors are available
Features:
LED fluorescent light
Comes in aluminum alloy material with acrylic cover
Built-in dedicated LED driver with PWM constant current supply to ensure longer operating lifespan and to minimize brightness deterioration due to overdriven, unlike many other designs where only normal rectifier and simple RC circuit is employed
Any individual LED failure will not cause other LEDs in working condition to black out
Direct plug-in replacement for conventional T8 fluorescent tube
With electrical or magnetic ballast and starter
Does not need such ballast/starter to operate and normally its performance should not be affected if left intact
With HB LEDs and higher power factor value
Recommended to bypass the magnetic ballast if there is negative impact on PF value or blinking
Not recommended for fixtures with electronic ballast/starter due to much higher voltage
Internal wiring of such fixture must be reconnected to have the electronic ballast/starter removed
Available in 100 to 150V, 60Hz and 190 to 260V, 50Hz
Application areas: suitable for room, hotel, office, supermarket, and commercial building
Specifications:
Voltage: 110/240V AC
PF: 0.90
Power: 9W
IP: IP40
LED quantity: 168 pieces x φ3LED
Luminous flux: 600 to 700lm
Wavelength: 2,700 to 7,000K
Working frequency: 50/60Hz
Working temperature: -20 to +50?C
Length:60CM
Lifespan: 50,000 hours
Material: aluminum alloy + PC
Beam angle: 120 to 135 degrees
Light decay: 3% after 3,000 hours
Equal to 45W traditional fluorescent lamp
Remarks: any colors are available
Features:
LED fluorescent light
Comes in aluminum alloy material with acrylic cover
Built-in dedicated LED driver with PWM constant current supply to ensure longer operating lifespan and to minimize brightness deterioration due to overdriven, unlike many other designs where only normal rectifier and simple RC circuit is employed
Any individual LED failure will not cause other LEDs in working condition to black out
Direct plug-in replacement for conventional T8 fluorescent tube
With electrical or magnetic ballast and starter
Does not need such ballast/starter to operate and normally its performance should not be affected if left intact
With HB LEDs and higher power factor value
Recommended to bypass the magnetic ballast if there is negative impact on PF value or blinking
Not recommended for fixtures with electronic ballast/starter due to much higher voltage
Internal wiring of such fixture must be reconnected to have the electronic ballast/starter removed
Available in 100 to 150V, 60Hz and 190 to 260V, 50Hz
Application areas: suitable for room, hotel, office, supermarket, and commercial building
Product Tags: LED Tube Light , dynamo emergency light, recessed spot light
