• Model Number: AP-G2425
• Place of Origin: Guangdong, China
• Minimum Order Quantity: 0 Pieces
• Supply Capacity: 0 Pieces/month
• MemberShip: Free Member
• Inquiry Now
• Bookmark & Share:

Description

1 Introduction:

AP-G2425A/B is double component, heat-curing silicone elastomer meterial, it uses for LED package. After curing, it has high-light transmittance, good heat-stability, small stress and low hygroscopicity etc.. Applying to Lens fills.

2 Technical Parameter:





Items



Technical Parameter





Before Curing(A component)



Appearance



Colorless Transparent Liquid





Viscosity mPa· s(25¡æ)



3200





Before Curing(B component)



Appearance



Colorless Transparent Liquid





Viscosity mPa· s(25¡æ)



2500





Mix Ratio



1: 1





Mix Viscosity mPa. S(25¡æ)



2800





Typical Curing Condition



100¡æ× 1h£«120¡æ× 1h





After Curing



Appearance



High Transparent Elastomer





Hardness(ShoreA)



42





Refractive Index(25¡æ)



1.45





Transmittance (£¥, 450 nm)



©ƒ96





3 Usage:

A: B=1: 1, we suggest to use the planetary mixer to mix the A& B components, mixed prior to application, and can be used after you remove the bubble in the condition of 10mmHg vacuum under 45¡æ. Please operate in dry and clear enviroment.

4 Attentions:

Some of materials, chemical agents, curing agents, plasticizers can control the gel material’ s curing. There are are including:
1 organotin and other metallorganic compound
2 sulphur, polysulfide, polysulfone and other sulfur-containing
3 amine, polyester rubber and other ammoniac
4 phosphorig and other phosphorig-containing
5 Some flux residues

If any doubt that whether some kind of material would restrain the curing, we suggest a compatibility experiment test for the suitability. If the uncured packaging materials exist the surface of the curing ones, then the curing is incompatible and will restrain curing.

5 Storage and transportation:
1 The storage period is 6 months, and should be preserved in shade (above 25¡æ) and keep it dry.
2 This product is nontoxic and non-dangerous cargo, can be transport as normal chemical.
3 Be careful of the leakage during transportation, both of A, B components should be sealed up.